§ 60.2670. What emission limitations must I meet and by when?.

Code of Federal Regulations

Title 40. Protection of Environment

Chapter I. ENVIRONMENTAL PROTECTION AGENCY

Subchapter C. AIR PROGRAMS

Part 60. STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES

Subpart DDDD. EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS

MODEL RULE-EMISSION LIMITATIONS AND OPERATING LIMITS

Current effective through June 16, 2020

§ 60.2670. What emission limitations must I meet and by when?

(a) You must meet the emission limitations for each CISWI, including bypass stack or vent, specified in table 2 of this subpart or tables 6 through 9 of this subpart by the final compliance date under the approved state plan, federal plan, or delegation, as applicable. The emission limitations apply at all times the unit is operating including and not limited to startup, shutdown, or malfunction.
(b) Units that do not use wet scrubbers must maintain opacity to less than or equal to the percent opacity (three 1-hour blocks consisting of ten 6-minute average opacity values) specified in table 2 of this subpart, as applicable.

Cite as 40 C.F.R. § 60.2670

History. 81 FR 41001, Jun. 23, 2016; 84 FR 15884, Apr. 16, 2019